DDoptics Riflescope Nighteagle V6 2.5-15x50 NFX Gen3 | MRAD | A4N | manual illuminated dot

Product information "DDoptics Riflescope | Nighteagle V6 2.5-15x50 NFX | Gen3 | MRAD | A4N"


DDoptics Riflescope V6 2,5-15x50 NFX special version with more field of view.

V6 6x zoom
Reticle adjustment Metal turrets (no plastic)
CT glass (Clear Transmission) (low dispersion)
Double scaling (double turn)
Zerostop for ASV (zero stop)
New design of the magnification adjustment ring
New reticle 4 (A4N) with significantly finer bars
hard, tactical 0.1 MRAD click detent (1 cm/click)
Adjustment range 184 clicks = 1.84 m at 100 m
Accessories: 1x flip caps, cleaning cloth, DDoptics chip, targets, target optics instructions, ballistics set

New features
What's new about the latest generation of riflescopes? 3 changes immediately catch the eye at first glance:1. the magnification adjustment ring has been noticeably changed and now provides a better grip thanks to its coarser structure.2. the reticle 4 has been made significantly finer and creates more space in the center.3. the reticle adjustment is made of metal, is more clearly defined and has double turn and Zerostop.
Robust adjustment mechanism for demanding use
The reticle adjustment turrets of the DDoptics generation III riflescopes
are made of a robust aluminum alloy and are free of all plastic parts.
plastic parts. All aluminum parts are coated with the new, non-shiny
non-glossy DDoptics "fine-black" anodized coating. The
The adjustment mechanism has been converted to the tactical version, i.e. it is
is not only highly impact-resistant and completely waterproof, but also
hard-running and therefore protected against unintentional adjustment. This means that
This means that the reticle adjustment can also be used "open" in everyday hunting
screw cap, in order to be able to quickly adjust the reticle depending on the situation.
Quick reticle adjustment with Zerostop
A double scale (double turn) on the elevation adjustment turret can be used to
The number of click adjustments made can be read off and set accordingly.
After firing, the reticle adjustment can be "zeroed". The zero stop ring is then turned as far as it will go. The zero setting is then locked from below using the Zerostop ring
from below to achieve a stop at the zero position.
position. Starting from the zero position - assuming knowledge of the
different firing distances can be preset from the zero position using a
can be preset using a marking system. The side adjustment turret
is labeled with two opposing scales. Starting from the zero setting
setting, the reticle can be preset here depending on the wind direction and strength or any movement of the target.
New reticle 4 for minimum target coverage
When looking through the new Generation III of the Nighteagle HDX
riflescopes, the observer immediately recognizes the practical design: the crosshairs in reticle
4N reticle is much finer and the originally somewhat thicker outer
beams are now only half as thick and are much further apart.
further apart. This is a great advantage, especially for the hunter in
hunter in poor light conditions, as the target is only minimally obscured and
thus optimally supporting a lightning-fast and safe shot.
is optimally supported.
The illuminated reticle 4N is located in the eyepiece image plane (2nd image plane).
This means that it always remains the same size when changing magnification.
No tools are required to adjust the reticle. The
riflescope has a tactical 0.1 MRAD adjustment, i.e. the reticle is adjusted per
click, the reticle adjusts
by 0.1 MRAD, i.e. by 1 cm at 100 m. For the user in
Europe simple use in the decimal system. The click adjustment
works with absolute repeat accuracy and can be reset to zero after
reset to zero after firing (in the event that several loads are used).
loads are used).
Total adjustment range:18.4 MRAD - 184 clicks - 1.84 mAdjustment range / click at 100 m: 1 cmAdjustment range / click at 200 m: 2 cmAdjustment range / click at 300 m: 3 cmAdjustment range / click at 300 m: 3 cm